Easycontrol Smarthome Giải Pháp Nhà Thông Minh SmartHome ACIS 2020

ACIS'S SMART DEVICES

SMART SWITCH: RE OLED

- Size: W-72mm x L-125mm x H- 41mm: Suitable for common rectangle socket(50 x 100).

- Power supply: AC 180 VAC~ 240VAC, 50Hz ~60Hz.

- Touch:6 touch button.

- Display: Mono OLED -0.96 inch

- Output type: Replay

- Output channel: 4 channels

- Output power: Standard 5A/channel.Startup current MAX=10A

- Power consumption: 0.12W ( no load)

- Connectivity:Wireless-FSK, 433 MH/ 868 MH / 915 MH, Mesh Network integrated.

- Range: 100m (outdoor or Max 2 floors (indoor).

- RAM/ROM/FLASH: 128KB

- Power management IC:Texas Instrument (USA),Power Integrations (USA)

- Protection:Over voltage, low voltage,noise, cancelling

- Control 4 ON/OFF channels, 220V AC load.

- Control 4 scenes (RE4), 3 scenes (RE3), 4 scenes (RE2), 6 scenes (SB6) (setup and config by center device

- Sync channel’s name, scenes's name date time by application.

- High sense capacity touch technology and isolated with high voltage area

- Config and setup easily with OLED display.

- Two - way communication with corrected response status of load to application

- Working with iHome application on smart phone and tablet (iOS and Android).

- Automatic reminder, can set once time, day of week or repeating all day.

- Power on status: can set default OFF, default ON or remember last status.

- Lock touch button (safe for children

- Speaker, LED indicator for status and LED indicator for warning and error

- Can reverse LED indicator status.

- Support manual reset

- Support linker feature, can setup and working with another smart switch.

- Support control via remote

- Support FOTA (Firmware on the air), always update latest feature in the future with 5 years commitment

- High sensitivity touch with auto calibrating with environment

- High security protection: AES 128 crypto with time key

- Repeater and Mesh network

- DHCP, setup and config network ID automatically

- Integrating electric arcs -protect relay up to 200.000 times

- Integrating backup last status when power down

- Auto sync status to application

- Integrating HW error management and auto reboot

- Auto check error and fix

- Sync and parallel working, extend system easily

SMART SWITCH: RE REC

- Size: W-72mm x L-125mm x H- 41mm: Suitable for common rectangle socket(50 x 100).

- Power supply: AC 180 VAC~ 240VAC, 50Hz ~60Hz.

- Touch:6 touch button.

- Output type: Replay

- Output channel: 4 channels

- Output power: Standard 5A/channel.Startup current MAX=10A

- Power consumption: 0.12W ( no load)

- Connectivity:Wireless-FSK, 433 MH/ 868 MH / 915 MH, Mesh Network integrated.

- Range: 100m (outdoor or Max 2 floors (indoor).

- RAM/ROM/FLASH: 128KB

- Power management IC:Texas Instrument (USA),Power Integrations (USA)

- Protection:Over voltage, low voltage,noise, cancelling

- Control 4 ON/OFF channels, 220V AC load.

- Control 4 scenes (RE4), 3 scenes (RE3), 4 scenes (RE2), 6 scenes (SB6) (setup and config by center device

- Sync channel’s name, scenes's name date time by application.

- High sense capacity touch technology and isolated with high voltage area

- Two - way communication with corrected response status of load to application

- Working with iHome application on smart phone and tablet (iOS and Android).

- Automatic reminder, can set once time, day of week or repeating all day.

- Power on status: can set default OFF, default ON or remember last status.

- Lock touch button (safe for children

- Speaker, LED indicator for status and LED indicator for warning and error

- Can reverse LED indicator status.

- Support manual reset

- Support linker feature, can setup and working with another smart switch.

- Support control via remote

- Support FOTA (Firmware on the air), always update latest feature in the future with 5 years commitment

- High sensitivity touch with auto calibrating with environment

- High security protection: AES 128 crypto with time key

- Repeater and Mesh network

- DHCP, setup and config network ID automatically

- Integrating electric arcs -protect relay up to 200.000 times

- Integrating backup last status when power down

- Auto sync status to application

- Integrating HW error management and auto reboot

- Auto check error and fix

- Sync and parallel working, extend system easily

SMART SWITCH: SSW REC

- Size: W-72mm x L-125mm x H- 41mm: Suitable for common rectangle socket(50 x 100).

- Power supply: AC 180 VAC~ 240VAC, 50Hz ~60Hz.

- Touch:4 touch button.

- Output type: Replay

- Output channel: 4 channels

- Output power: Standard 5A/channel.Startup current MAX=10A

- Power consumption: 0.12W ( no load)

- Connectivity:Wireless-FSK, 433 MHz/ 868 MHz / 915 MHz, Mesh Network integrated.

- Range: 100m (outdoor or Max 2 floors (indoor).

- RAM/ROM/FLASH: 128KB

- Power management IC:Texas Instrument (USA),Power Integrations (USA)

- Protection:Over voltage, low voltage,noise, cancelling

- Control 4 ON/OFF channels, 220V AC load.

- Control 8 scenes (setup and config by center device).

- Sync channel’s name, scenes's name date time by application.

- High sense capacity touch technology and isolated with high voltage area

- Two - way communication with corrected response status of load to application

- Working with iHome application on smart phone and tablet (iOS and Android).

- Automatic reminder, can set once time, day of week or repeating all day.

- Power on status: can set default OFF, default ON or remember last status.

- Lock touch button (safe for children

- Speaker, LED indicator for status and LED indicator for warning and error

- Can set up linker and scenes without center

- Support manual reset

- Support linker feature, can setup and working with another smart switch.

- Support control via remote

- Protection: Fuse (20A) for all loads and LED indicator for blew or unplug fuse

- Support FOTA (Firmware on the air), always update latest feature in the future with 5 years commitment

- High sensitivity touch with auto calibrating with environment

- High security protection: AES 128 crypto with time key

- Repeater and Mesh network

- DHCP, setup and config network ID automatically

- Integrating electric arcs -protect relay up to 200.000 times

- Integrating backup last status when power down

- Auto sync status to application

- Integrating HW error management and auto reboot

- Auto check error and fix

- Sync and parallel working, extend system easily

SMART SWITCH: SSW SQ

- Size: W-86mm x L-86mm x H- 28mm: Suitable for common rectangle socket(75 x 75).

- Power supply: AC 180 VAC~ 240VAC, 50Hz ~60Hz.

- Touch:5 touch button.

- Output type: Replay

- Output channel: 4 channels

- Output power: Standard 5A/channel.Startup current MAX=10A

- Power consumption: 0.12W ( no load)

- Connectivity:Wireless-FSK, 433 MH/ 868 MH / 915 MH, Mesh Network integrated.

- Range: 100m (outdoor or Max 2 floors (indoor).

- RAM/ROM/FLASH: 128KB

- Power management IC:Texas Instrument (USA),Power Integrations (USA)

- Protection:Over voltage, low voltage,noise, cancelling

- Control 4 ON/OFF channels, 220V AC load.

- Control 8 scenes (setup and config by center device).

- Sync channel’s name, scenes's name date time by application.

- High sense capacity touch technology and isolated with high voltage area

- Two - way communication with corrected response status of load to application

- Working with iHome application on smart phone and tablet (iOS and Android).

- Automatic reminder, can set once time, day of week or repeating all day.

- Power on status: can set default OFF, default ON or remember last status.

- Lock touch button (safe for children

- Speaker, LED indicator for status and LED indicator for warning and error

- Can set up linker and scenes without center

- Support manual reset

- Support linker feature, can setup and working with another smart switch.

- Support control via remote

- Protection: Fuse (20A) for all loads and LED indicator for blew or unplug fuse

- Support FOTA (Firmware on the air), always update latest feature in the future with 5 years commitment

- High sensitivity touch with auto calibrating with environment

- High security protection: AES 128 crypto with time key

- Repeater and Mesh network

- DHCP, setup and config network ID automatically

- Integrating electric arcs -protect relay up to 200.000 times

- Integrating backup last status when power down

- Auto sync status to application

- Integrating HW error management and auto reboot

- Auto check error and fix

- Sync and parallel working, extend system easily

CIRCLE WIRELESS SMART INFRARED CONTROLLED: IR CIR

- Diameter (mm) x H(mm): D100mm x H25mm.

- Button: 3 buttons.

- Display: 7 segments LED

- Power supply: Adapter DC (12VDC~24VDC)-1A.

- Control type: Learn and transmit infrared signal from remote

- Output: 4 channels, 30 commands/channel, 5 transmit IR LED, 360*, 38 KHz

- IR signal length:50~1500 bytes.

- Transmit: IR LED angle:18

- Power consumption:0.5W, no load

- Connectivity: Wireless- FSK, 433 MHz/ 868 MHz / 915 MHz, Mesh Network integrated..

- Wireless power: Rxsenstive -110dbm, Txpower + 7dbm.

- Range: 100m (outdoor) or Max 2 floors ( indoor)

- CPU: ARM M (USA)

- RAM/ROM/FLASH: 256KB

- Touch driver: Microchip (USA)

- Power management IC:Texas Instrument ( USA)

- Protection:Reverse pole

- Control 4 IR channels, 30 commands/ channel

- Working with iHome application on smart phone and Tablet (iOS and Android).

- Can learn from universal IR remote from market.

- Control air-con, TV, DVD, fan, via infrared signal

- Can run manually (see user guideline for detail)

- Wireless connect to SSW: Can control Air -con, TV, fan ...from scene on SSW

- Wireless connect to remote Can control Air -con, TV, fan ...from remote button directly

- Working with or without internet from SSW, remote, MCE,GW

- Enable/disable repeater feature, reset factory

- Auto on/off display, on/off indicator LED

- Support FOTA (Firmware on the air), always update latest feature in the future with 5 years commitment

- High sensitivity touch with auto calibrating with environment

- ADC filer and noise cancelling

- Backup data on flash IC.

- High security protection: AES 128 crypto with time key

- Repeater and Mesh network

- DHCP, setup and config network ID automatically

- Integrating HW error management and auto reboot

- Auto check error and fix

- Sync and parallel working, extend system easily

RETANGLE WIRELESS SMART INFRARED CONTROLLER IR REC

- Dimension: L85 mm x H50mm x.D21 mm

- Button: 3 buttons.

- Display: 7 segments LED

- Power supply: Adapter DC (12VDC~24VDC)-1A.

- Control type: Learn and transmit infrared signal from remote

- Output: 4 channels, 30 commands/channel, 5 transmit IR LED, 360*, 38 KHz

- IR signal length:50~1500 bytes.

- Transmit: IR LED angle:18*

- Power consumption:0.5W, no load

- Connectivity: Wireless- FSK, 433 MHz/ 868 MHz / 915 MHz, Mesh Network integrated..

- Wireless power: Rxsenstive -110dbm, Txpower + 7dbm.

- Range: 100m (outdoor) or Max 2 floors ( indoor)

- CPU: ARM M (USA)

- RAM/ROM/FLASH: 256KB

- Touch driver: Microchip (USA)

- Power management IC:Texas Instrument ( USA)

- Protection:Reverse pole

- Control 4 IR channels, 30 commands/ channel

- Working with iHome application on smart phone and Tablet (iOS and Android).

- Can learn from universal IR remote from market.

- Control air-con, TV, DVD, fan, via infrared signal

- Can run manually (see user guideline for detail)

- Wireless connect to SSW: Can control Air -con, TV, fan ...from scene on SSW

- Wireless connect to remote Can control Air -con, TV, fan ...from remote button directly

- Working with or without internet from SSW, remote, MCE,GW

- Enable/disable repeater feature, reset factory

- Auto on/off display, on/off indicator LED

- Support FOTA (Firmware on the air), always update latest feature in the future with 5 years commitment

- ADC filer and noise cancelling

- Backup data on flash IC

- High security protection: AES 128 crypto with time key.

- Repeater and Mesh network

- DHCP, setup and config network ID automatically

- Integrating HW error management and auto reboot

- Auto check error and fix

- Sync and parallel working, extend system easily

CONTROL MOTOR DC REC

- Dimension: L72 mm x H67mm x.D50mm

- Button: 1 Push buttons.

- Display: LED indicator.

- Power supply: AC 180VAC~ 240VAC,50Hz~60Hz.

- Control type: dry contact ( replay)

- Output 5 channels: Com, Up, Down, Stop (No), Stop ( NC)

-Output mode:Default (push button), can onfig momentary mode

- Transmit: IR LED angle:18*

- Output power: Max 5A-220VAC

- Power consumption: 0.15W

-Connectivity: Wireless FSK, 433 MHz/ 868 MHz/ 915 MHz, Mesh Network integrated.

- Range: 100m (outdoor) or Max 2 floors ( indoor)

- CPU: ARM M (USA)

- RAM/ROM/FLASH: 128KB

- Wireless power: Rxsenstive-110dbm, Txpower + 7dbm.

- Power management IC:Texas Instrument ( USA)

- Protection:Reverse pole

- Every device control 1 motor with 3 levels: UP, DOWN, STOP.

- Using dry contact, so easy to connect to common motor on the market.

- Wireless connecting to SSW: SSW scene can control motor

- Wireless connecting to Remote: smart home remote can control motor directly

- No need internet when using with SSW, remote, MCE/GW

- Working with iHome application on smart phone and Tablet (iOS and Android).

- Support FOTA (Firmware on the air), always update latest feature in the future with 5 years commitment

- High security protection: AES 128 crypto with time key

- Repeater and Mesh network

- DHCP, setup and config network ID automatically

- Integrating electric arcs -protect relay up to 200.000 times

- Integrating backup last status when power down

- Auto sync status to application

- Integrating HW error management and auto reboot

- uto check error and fix

- Sync and parallel working, extend system easily

WIRELESS ALARM LINKER ALE REC

- Dimension: L52 mm x W20mm x.D50mm

- Button: 1 Push buttons.

- Display: LED indicator.

- Power supply: AC 180VAC~ 240VAC,50Hz~60Hz.

- Power consumption: 0.05W

-Connectivity: Wireless FSK, 433 MHz/ 868 MHz/ 915 MHz, Mesh Network integrated.

- Wireless power: Rxsenstive-110dbm, Txpower + 7dbm.

- Range: 100m (outdoor) or Max 2 floors ( indoor)

- CPU: ARM M (USA)

- RAM/ROM/FLASH: 128KB

- Power management IC:Texas Instrument ( USA)

- Protection:No

Connect to third -part system to ACIS system

- Can activate scene in MCE/GW or SSW

- Support FOTA (Firmware on the air), always update latest feature in the future with 5 years commitment

Backup data on flash IC

- High security protection: AES 128 crypto with time key

- Repeater and Mesh network

- DHCP, setup and config network ID automatically

- Integrating HW error management and auto reboot

- Auto check error and fix

- Sync and parallel working, extend system easily

HANDHELD WIRELESSR REMOTE REM REC

- Dimension: L120mm x W44mm x D18mm

- Button: 12 push buttons.

- Power supply: 12VDC-L1028-23A battery.

- Battery time: 6 months- 2 years ( 3.000 control times)

- Connectivity: Wireless-FSK, 433 MHz/ 868 MHz / 915 MHz, Mesh-Network integrated.

- Wireless power: Rxsenstive-110dbm, Txpower + 7dbm.

- Range: 100m (outdoor) or Max 2 floors ( indoor)

- CPU: ARM M (USA)

- RAM/ROM/FLASH: 128KB

- Power management IC:Texas Instrument ( USA)

- Protection:No

- 12 buttons can setup to control touch switch directly or activate scene

-Wireless connect to any ACIS devices.

- LED indicating for button status

-Using battery, easy replacement. Battery time is from 6 months to 2 years.

-Backup data on flash IC

- High security protection: AES 128 crypto with time key

- Repeater and Mesh network

- DHCP, setup and config network ID automatically

- Integrating HW error management and auto reboot

- Auto check error and fix

- Sync and parallel working, extend system easily

RETANGLE CENTER DEVICE MCE REC

- Dimension: D132 mm x H26 mm.

- Keypad: 16 touch buttons, high sensitivity.

- Display: network indicator LED,character LCD 16x2

- Speak: Yes

- Power supply: Adapter DC (12VDC~24VDC)-1A.

- Internet: Ethernet RJ45-DHCP, WIFI 2.4G, DHCP

- Network protocol: TCP/IP Client

- Output: 4 channels, 30 commands/channel, 5 transmit IR LED, 360*, 38 KHz

- Cloud computing: Integrated

- Power consumption:0.15W

- Connectivity: Wireless- FSK, 433 MHz/ 868 MHz / 915 MHz, Mesh Network integrated..

- Wireless power: Rxsenstive -110dbm, Txpower + 7dbm.

- Range: 100m (outdoor) or Max 2 floors ( indoor)

- CPU: ARM M (USA)

- RAM/ROM/FLASH: 256KB

- Touch driver: Microchip (USA)

- Power management IC:Texas Instrument ( USA)

- Protection:Reverse pole

- Center device for managing all ACIS end device and internet connection.

- Dynamic IP addressing for all ACIS end devices

- Setup and config scene content

- Set name for scene, end device, manual control for RE, IR, DC… directly

- Set timer for end device and scene

- Set linker button to execute scene from RE, REM,ALE…

- Sync all configs, datetime, scene data, name of device, …to cloud

- Display system information:end device status, network status,date time, service status, …

- Sync status of end device to cloud and update real time to application

- Advance config: lock button, set sensitivity for lock button, set sensitivity for touch, …

- Can work offline with scene and timer

- Play watch role in idle mode

- Support FOTA (Firmware on the air), always update latest feature in the future with 5 years commitment

- High sensitivity touch with auto calibrating with environment.

- DHCP.

- Cloud computing technology: Integrated

- Backup data on flash IC

- High security protection: AES 128 crypto with time key

- Repeater and Mesh network

- DHCP, setup and config network ID automatically

- Integrating HW error management and auto reboot

- Auto check error and fix

- Sync and parallel working, extend system easily, cooperating many center devices on a system

- Auto sync system data and setup online via iHome application

Call Now Button